1. Burn the PIC program of Miner hashboard

PICkit3, the pin 1 of the PICkit3 cable corresponds to the pin 1 of J3 on the PCB board, and needs to be connected to pins 1, 2, 3, 4, 5, and 6.

PICkit 3
PICkit3 Programming Tools

2. Burning Software

Open MPLAB IPE, select the device: PIC16F1704-I/SL, click power to select the power supply mode.

Click the operation, select the file to find the .HEX file to be burned; click the connection, the connection is normal; click the program button, click “Verify” after completion, the verification is completed, which proves that the burning is successful.

No Responses

Leave a Reply

Your email address will not be published. Required fields are marked *