Please note: Bitmain use the copper bar to replace the mos to save the cost, our water cooling kit is suitable for the following S19j Pro miner hashboard
The new S19j pro, not the mainstream mining machine water cooling kit is being tested……
Before buying, please check carefully, or contact customer service…….
Antminer S19j Pro Upgrade Water Cooling Kit Combination Set
Water Cooling Radiator For Miner & Server
Water pump：4500RPM 1300L/H
Fan: 800-3200RPM (Adjustable)
Power input: DC 12V
Power consumption: 53W 3.5A
Cooling power: 6500W
With a powerful power pump, high lift, and high-temperature resistance. Transparent water tank, observe the change of water level at any time. Compared with the traditional air cooling system, the radiator has the characteristics of low noise, strong heat.
It can effectively reduce the temperature of the hash board and the speed of the fan, thereby prolonging the service life of miner. Directly purchasing the upgraded water-cooling kit for the hashboard can help miners save time and trouble, and improve the working efficiency of the mining machine.
Radiator needs to be used with upgraded water cooling Kit
Do you want to upgrade your Antminer S19j Pro Air-cooling to Water-cooling heat sinks by an easy way?
1.Silent, no need fan any more.
2.Reduce failure rate / Save maintainance cost, no dust and corrosion from air cooling.
3.Reduce power consumption (-200W); Can increase more rate by overclocking(S19 T19 30%, S19 Pro 60%); The water also can be used
as a part of heating system, for energy recycling.
Notice: “The Water ”can be Pure water, Distilled water, Antifreeze, but NO tap water to prevent impurity deposition.
Antminer S19j Pro Upgraded Water cooling heat sinks
SOP(Standard Operating Procedure) – Easy to go
1.Disassemble the mainboard and heatsink.
2.Remove the gel on chips and clean.
3.Brush the gel on water cooling heatsink
4.Assemble upgraded mainboards, back plate, water divider.
5.Assemble the fan simulator, and original water pipe.
Antminer S19j Pro Upgraded Water cooling heat sinks (For 1 machine)
Gel 20g （For 1 machine or more）
Gel 1000g（For 100 machine）
If order 100 kits, we will provide Gel 1000g + 1 Stencil & brush for free.