Сипаттама

New Upgrade 18% to 30% Overclocking Board for Antminer S19 S19 pro T19

This is a new way to INCREASE your existing S19’s rates at a low cost, Brand New Overclocking Boards for T19 and S19 S19 Pro ASIC miner only! Increases RATES BY 30% on average, and only a fraction of the cost compared to buying a new ASIC miner with a higher rate.

A. Ауада салқындату (максималды деректер)
Antminer T19 84T→104T
Antminer T19 88T→108T
Antminer S19 95T→113T
Antminer S19 pro 110T→132T

B. Майды салқындату кезінде (максималды деректер)
Antminer T19 88T→128T
Antminer S19 95T→136T
Antminer S19 Pro 110T→154T

• Why choose our overclocking board instead of others?

1. Hardware overclocking, less damage to the machine
2. Do not steal computing power, increase the income of Miner
3. The installation is simple and convenient, and the performance is stable. There are multiple overclocking gears to choose from to meet the needs of customers in different environments.
4. Overclocking with water cooling kit designed by NBTC, Can increase more rate by overclocking (S19 T19 30%, S19 Pro 60%); The water also can be used as a part of heating system, for energy recycling, And Reduce power consumption about 200W.

*Since overclocking will significantly increase the power consumption of miner, the temperature of miner chip will increase significantly. Therefore, when using the overclocking board, it is necessary to ensure good heat dissipation conditions of the miner. The better the cooling conditions, the more overclocking headroom you can get. It is recommended to use it with our water cooling kit

There is nothing wrong with choosing us!

Efficient Antminer S19 S19 pro T19 S19j Pro Miner Upgrade:

1.  Антминер S19 T19 Upgrade Water Cooling Kit with External Water Cooling Radiator

2. Антминер S19 Pro Upgrade Water Cooling Kit with External Water Cooling Radiator

3. Антминер S19j Pro Upgrade Water Cooling Kit with External Water Cooling Radiator

4.  Антминер S19 T19 Upgrade Water Cooling Kit

5. Антминер S19 Pro Upgrade Water Cooling Kit

6. Антминер S19j Pro Upgrade Water Cooling Kit

S19 S19 Pro T19 S19j Pro Upgrade Water Cooling Kit is usually used with an external radiator

Materials required for overclocking(Packing List)

1. Overclocking control board*1
2. Fan simulator*1
(Can be used in environments that do not require fans, such as oil cooling)
3. Power regulator line*1
4. Hash board signal line*7

Ескерту: The Fan of the Miner must work normally in an air-cooled environment, and the use of fan simulation boards is prohibited. But using the NBTC upgraded water cooling kit does not require Fans.

Ескерту:

1. Біз сізге басқа электрондық керек-жарақтарды және IC керек-жарақтарын сатып аламыз. Сізге қажет өнімнің атауы мен санын айта аласыз,
2. Бізде көптеген бөліктер бар, бірақ олардың барлығы жүктелмейді. Қажетті үлгіні таппасаңыз, бізге хабарласып, қажетті бөлшектер мен мөлшерді айта аласыз.
3. Тасымалдау кезінде зақымдануды немесе жоғалтуды болдырмаңыз, бөлшектерді алған кезде мұқият тексеріңіз. Барлық сұрақтар бойынша маған дереу хабарласыңыз. Осы мәселені тез арада шешу үшін бірге жұмыс істейік!