Click 描述
TM4C1230C3PMI7R marking TM4C1230C3PMI7 TM4C1230C3PM TM4C1230 Series ARMCort-M4F TivC Microcontroller IC 32-Bit Single-Core 80MHz 32KB
(32K x 8) FLASH 64-LQFP (10×10)
Product Overview
TM4C1230C3PMI7R is a high-performance 32-bit microcontroller (MCU) based on the ARMCort-M4F core, belonging to the TivC series. The chip integrates a wealth of peripherals and storage resources, suitable for embedded application scenarios that require high performance, low power consumption and multi-function interfaces.
| Core Processor | ARMCort-M4F |
| Core Size | 32-Bit Single-Core |
| Speed | 80MHz |
| Connectivity | CANbus,I2C,IrDA,Microwire,SPI,SSI,UART/USART |
| Peripherals | Brown-out Detect / Reset, DMA, POR, WDT |
| Number of I/O | 49 |
| Program Memory Size | 32KB(32Kx8) |
| Program Memory Type | FLASH |
| EEPROM Size | 2K x 8 |
| RAM Size | 12K x 8 |
| Voltage-Supply (Vcc/Vdd) | 1.08V~3.63V |
| Data Converters | A/D12x12b |
| Oscillator Type | Internal |
| Operating Temperature | -40C~85C(TA) |
| Mounting Type | Surface Mount |
| Package/Case | 64-LQFP(10×10) |
| Base Product Number | TM4C1230 |
Core Features
1. Processor core: ARMCort-M4F 32-bit single-core processor, supporting single-precision floating-point unit (FPU). The maximum main frequency is 80 MHz, providing efficient data processing capabilities.
2. Storage Configuration:
***32 KB Flash Memory, used to store program code.
***12 KB SRAM, supports high-speed data reading and writing.
***2 KB EEPROM, used for non-volatile data storage.
3. Peripheral Interface:
***Communication interface: UART, I²C, SPI, SSI, CAN, etc., supporting multiple communication protocols.
***Analog peripherals: 12-bit analog-to-digital converter (ADC), comparator, etc., suitable for signal acquisition and processing.
***Timer and PWM: Supports multiple timing and pulse width modulation functions.
4. Power Supply and Power Consumption:
***Operating voltage range: 1.08V to 3.63V, adapting to a variety of power supply environments.
***Low Power Mode: Supports multiple power management modes to optimize energy efficiency.
5. Package and Pin:
***64-LQFP package, compact size, suitable for surface mounting.
***49 I/O pins, providing flexible hardware design options.
3. Main application areas
1. Industrial control: data acquisition, equipment monitoring, motion control, etc. Applicable to industrial automation, power systems, robots and other fields.
2. Smart home: smart lighting, security monitoring, environmental monitoring, etc. Support the development and deployment of Internet of Things (IoT) devices.
3. Automotive electronics: in-vehicle entertainment systems, body electronic control, sensor interfaces, etc. Meet the reliability and real-time requirements of automotive electronics.
4. Consumer electronics: home appliances, portable devices, medical electronics, etc. Provide high-performance, low-power solutions.
In addition, We also provide BOM Service! Like :
| T491A106K016AT: | Capacitor 16V 10uF 10% 1206 ESR=3 Ohms |
| T491A475K016AT: | Capacitor 16V 4.7uF 10% 1206 ESR=4 Ohms |
| T545V227M10ATE045: | Tantalum Capacitors – Polymer 10V 220uF 2917 20% ESR=45mOhms |
| TCJB106M035S0200: | Capacitor 35V 10uF 1210 20% ESR=200 mOhm |
| TFM322512ALMA4R7MTAA: | Inductor Power Shielded Thin Film 4.7uH 20% 1MHz Metal 1.9A 0.151Ohm DCR 1210 Automotive T/R |
| TG2520SMN 40.0000M-MCGNNM0: | TCXO Oscillators 40 MHz TCXO Clipped Sine Wave Oscillator 1.7V ~ 3.63V 4-SMD, No Lead |
| TKR331M1EF11M: | Capacitor aluminum electrolytic 330uF 35V 20% (10 X 12.5mm) |
| TL431AILP: | Programmable Precision Reference |
| TLE42744GSV33: | x.x Volt, 800mA Low-Dropout Linear Regulator, 4-pin |
| TLV75712PDBVR: | 1.2V 1-A, Low IQ, Small Size, Low Dropout Regulator |
| TM4C1230C3PMI7R: | STM32 ARM-based 32-bit MCU with 128 Kbytes Flash, 64-pin LQFP, Industrial Temperature |
| TMPC0605H-220MG-D: | 2.5A 22uH ±20% 5.5A SMD Power Inductors ROHS |
| TMS320F28335PGFA: | IC MCU 32BIT 512KB FLASH 176LQFP |
