PAT1220-C-0DB-T5 RF Attenuators IC: The 0 dB Thin-Film Chip Pad That Holds DC–10 GHz

SEO Title: PAT1220-C-0DB-T5 RF Attenuators IC in Stock | NBTC

Meta Description: PAT1220-C-0DB-T5 RF Attenuators IC in stock at NBTC — Susumu 0 dB, 50 ohm, 0805 thin-film chip attenuator, DC–10 GHz. Secure trade. BOM kitting made simple.

Primary Keyword: PAT1220-C-0DB-T5 RF Attenuators IC

Secondary Keywords: PAT1220-C-0DB-T5, Susumu PAT1220, 0 dB chip attenuator, thin-film attenuator, 0805 RF attenuator, 50 ohm attenuator in stock, BOM kitting service

Introduction

Not every RF part is dramatic, and the PAT1220-C-0DB-T5 RF Attenuators IC is a case in point. It is a 0 dB thin-film chip attenuator from Susumu’s PAT series — a part that adds no attenuation at all, yet earns its place by presenting a clean, matched 50 ohm through-path in a package the size of a chip resistor. And NBTC holds a large in-stock quantity of the genuine part.

What Is the PAT1220-C-0DB-T5?

The PAT1220-C-0DB-T5 is a fixed thin-film chip attenuator built on a high-purity alumina substrate with Ni-alloy thin-film elements and wrap-around terminations. The “1220” designates industry-standard 0805 dimensions (2.00 x 1.25 mm); “-0DB” is the 0 dB attenuation value; “T5” means tape-and-reel packaging of 5,000 pieces.

A 0 dB pad looks trivial, but it has three real uses: a matched pattern placeholder, so you can design in the footprint now and populate a 3 dB or 6 dB value later without a board respin; a matched through-connection with controlled parasitics; and a reference element in calibration hardware. Thin-film metallization also holds a ±50 ppm/°C TCR with low parasitic capacitance and inductance, which matters most at 10 GHz.

Key Specifications of the PAT1220-C-0DB-T5

Why Engineers Specify the PAT1220-C-0DB-T5

1. One footprint, any attenuation. 0805 PAT pads are interchangeable across 0–10 dB values, so a single layout covers every tuning option.

2. Stable over frequency, temperature and time. Thin-film construction keeps attenuation and impedance drift minimal up to 10 GHz.

3. Low parasitics, resistor-like handling. Minimal inductance and capacitance protect microwave performance, and wrap-around terminals let standard SMT lines place the part without special feeders.

Typical Applications

• Cellular base stations and wireless modules — gain trimming and impedance matching in RX/TX chains
• Wideband measurement instrumentation and calibration fixtures
• RF board placeholders for later attenuation changes and matched line terminations

Stock, Lead Time and Where to Buy

Susumu’s factory lead time on the PAT1220-C-0DB-T5 runs to roughly 32 weeks — a quarter of waiting, for a component worth cents.

NBTC solves that. As a one-stop supplier with massive in-stock inventory, NBTC ships the PAT1220-C-0DB-T5 in large ready-to-go quantities — cut tape for prototypes, full 5,000-piece reels for production.

Why Buy the PAT1220-C-0DB-T5 from NBTC

Large in-stock quantity of the PAT1220-C-0DB-T5. Genuine Susumu parts, correctly marked with reels intact, available now rather than next quarter.

One-stop sourcing. LNA ICs, filters, capacitors, connectors and power devices usually ride along on the same BOM, and one order covers them all.

BOM kitting made simple. Send your bill of materials; we consolidate line items, match quantities and hand over a single verified kit.

Trade with confidence. NBTC operates storefronts on major B2B marketplaces — including Alibaba.com (www.rsthk.com) — so payment and transactions are protected end to end. Buy electronic components at https://nbtcminer.com and make BOM kitting simpler.

• 

PAT1220-C-0DB

$0.90

PAT1220-C-0DB

• Жеткізу күні: толық төлемнен кейін 3 күн ішінде жеткізіледі.
• Төлем әдісі: ақша аудару | BTC | USDT(ERC20/TRC20)
• Жаппай тапсырысты және басқа бөліктердің бағасын қолдау
• Packing List: 1PCS
• Other Name: PAT1220-C-0DB-T5
• Status: New Original in stock(100% Original)

 WhatsApp: +8618124018244

PAT1220-C-0DB саны

Себетке қосу

SKU: PAT1220-C-0DB

分类: BOM пішіні, BOM қызметі

标签:БОМ тізімі, RF Attenuators IC, RF IC

Frequently Asked Questions

What is the PAT1220-C-0DB-T5? A Susumu thin-film chip attenuator in an 0805 package: 0 dB, ±0.3 dB tolerance.

What frequency range and power rating? DC to 10 GHz, VSWR below 1.3 at 50 ohm, 100 mW.

Does NBTC have it in stock? Yes — large in-stock quantities, shipped quickly. Visit nbtcminer.com or send your BOM for a quote.

Final Thoughts

The PAT1220-C-0DB-T5 RF Attenuators IC proves a part need not be complex to be indispensable: 0 dB, 50 ohm, VSWR under 1.3, DC to 10 GHz and thin-film stability, in an 0805 footprint any assembly line already knows how to place.

Getting it should not be the hard part. NBTC removes that bottleneck with large in-stock inventory, one-stop sourcing and secure trade on established B2B platforms. Send your BOM for the PAT1220-C-0DB-T5 today.